|
|
|
Reference
|
DA-06
|
|
power supply
|
12 V / 70 mA
|
|
maximum load
|
5A
|
|
weight
|
138 gr.
|
|
|
|
|
|
|
|
It allows to record on each card between 1 and 5 credits. When the user inserts the card into the DA-06 and press the push button to valid, the module counts down a credit and activate the relay output. The output can be adjusted between 1 and 120 minutes. Once this timing over, the output is disconnected. The user has to repeat the process to start a new cycle. Through the circuit’s local controls, the DA-06 can be configured to operate like a programmer and recorder, or like a reader and a credit counter down. Both modules include indicators leds to indicate the credits status into the card, a virgin 1 Kbyte Cebek chip card, and P.I.P. Telephone chip cards are not accepted. With the ref. C-7294 you can obtain packs composed by 10 virgin card. Recommended power supply: FE-2 Main board dimensions : 122 x 65 x 30 mm. Reader/recorder dimensions : 45 x 60 x 8 mm. Leds board dimensions: 15 x 65 x 8 mm
|
|