|
The T-3 and T-11 modules are interfaces composed by 4 and 8 (according to the model) Triac outputs. Through optocouplers, they electrically insulate each input control signals in relation to the corresponding output. If you inject a signal between 3 and 24 V DC on any input, the Triac of the corresponding output will supply 230 VAC till the input voltage will decrease to 0. Inductive loads (like transformers, neon, halogen lamps with transformer, etc…) are not allowed. You can only use resistive loads (i.e Lamps, resistors, etc…) These modules can be inserted into DIN-RAIL:T-3= C-7589 and T-11= C-7596
|